Temperature Control

304 Stainless Steel, 25ft long tube Short Cooling Coil fits up to 7 Gallon Fermentor Tall Cooling Coil fits 14 to 42 Gallon Fermentor Easy to install and sanitize bulkhead fittings 1/2" NPT Connections Includes two 3/8" 90 degree QuickConnector™ fittings! Dimensions: Short =...

Key Features Multi-vessel crashing and fermentation temperature control. Convenient plug and play temperature controller dock. Compatible with up to 6 Pump & Controller Kits (optional). Tidy cable and hose management. Small footprint. Quiet operation. Optional concentrated propylene glycol offered in convenient 2.5 gallon jug....

The IceMaster 100 is the perfect glycol chiller for small to medium volume beer makers. It offers high performance despite its compact size so it is well suited for jacketed fermenters and brite tanks. This unit does not come with a pump. You must...

The IceMaster Max 4 is designed to cool fermentations in small vessels. It features 4 built-in submersible pumps with independent digital temperature controllers and can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. Each controller includes a temperature...

Twist Lock extension cord. 10 Gauge, 3 conductor SO Cord. 6ft. NEMA L6-30 plug to NEMA L6-30 receptacle

This is a replacement clear silicone gasket for any female camlock coupling. It comes standard inside the Cam B, C, Big C, D, and DC. You don't have to buy them separately unless you need a replacement or spares. Material: Silicone

1.5" Tri-Clamp Silicone Gasket is used between fittings for a high temperature seal. Handles a wide range of temperatures from -58°F to 400°F. Material: Silicone Dimensions: 1.5" Fitting

304 Stainless Steel Large HERMS Coil fits 15 to 55 Gallon Kettles Easy to install and sanitize bulkhead fittings 1/2" NPT Connections Includes two 1/2" elbow QuickConnector™ fittings Dimensions: Small = 7.75in (tall); 25ft long tube Large = 9.5in (tall); 32ft long tube HERMS...

Add Spike Brewing's HERMS coil to your Hot Liquor Tank Kettle to complete your HERMS setup.This is the same coil used in their Trio system. Recirculate your wort from the mash tun through this coil in the HLT to maintain precise mash temperatures. 25'...

Spike's TC-100 temp control system will manage both cooling and heating of your FLEX. The digital controller's temp probe inserts into the included thermowell that attaches to the secondary port of the FLEX. Also included is a specially fitted neoprene jacket which features reinforced port holes...

Spike's TC100 temp control system will manage both cooling and heating of your Spike Conical. The digital controller's temp probe will feed into the included thermowell on their CF Series Conical. Also included is a specially fitted neoprene jacket which features reinforced port holes to reduce the chance...

Use this analog unit to control the temperature of a refrigerator, freezer, or air conditioner. Often referred to as a refrigerator thermostat. It enables you to ferment and store beer at correct temperatures when the ambient room temperature is too warm. Your electrical cooling...

The Inkbird dual stage temperature controller is an easy to use and economical controller that is perfect for home brewing. Control both heating and cooling, and set independent differentials for each to protect your heating and cooling devices. The Inkbird controller performs many of...

With the WiFi enabled Inkbird controller you can monitor your fermentation temperature from virtually anywhere with an internet connection. Adjust settings with your mobile device and receive push notifications from the free companion app, InkbirdSmart, available for both iOS and Android. The app also...

Cable assembly with quick disconnects on both ends. Has XLR style plug for use with EBC-SV and EBC III. This is the old style for pre-2014 models.

This silicone braided cable has an extra layer of metal braid between the outside silicone insulation and inside Teflon insulation for better protection and durability. Both ends of this braided cable are female P2CON-XS12 connector, which is compatible with standard liquid tight probe or...

Silicone washer for temperature probes.

1/2" NPT - 4 inches long temperature probe.  Compatible with all of our controllers that come with a probe.

1/2" NPT - 6 inches long temperature probe. Compatible with all of our controllers that come with a probe. Installs in vessel NPT fitting, thermowell, or in a stopper in a fermenter.

1/2" NPT - 8 inches long temperature probe. Compatible with all of our controllers that come with a probe. Installs in vessel thermowell, or in a stopper in a fermenter.

These RTD temperature sensors are for applications that need liquid tight seal. Perfect for beer brewing. They can be easily installed on a standard or instrument (short outlet)  tri-clamp (tri-clover) Tee. Probe length is 2.36" (60mm for Standard Tee), and 8" (200 mm). The diameter of...

1/2" NPT - 1.5 inch long temperature probe.  Compatible with all of our controllers that come with a probe.  Installs in 1/2 inch Tee to monitor temp of circulating liquid, or any 1/2"NPT fitting.

Temperature probe with weldless kit, 2 inches long. Compatible with all of our controllers that come with a probe.  Installs in 9/16 inch hole directly in vessel.

Temperature probe with weldless kit, 4 inches long. Compatible with all of our controllers that come with a probe.  Installs in 9/16 inch hole directly in vessel.

These RTD temperature sensors are for applications that need liquid tight seal. Perfect for beer brewing. They can be easily installed on a standard or instrument (short outlet)  tri-clamp (tri-clover) Tee. Probe length is 2.36" (60mm for Standard Tee), and 8" (200 mm). The diameter of...

Floating thermometer. Multiple uses in brewing and winemaking. (15 to 110C), (-10 to 220F)

Peel and stick liquid crystal thermometer. Shows temperature range for ales and lagers.

Dial face with easy to read numbers. 12" long probe makes it easy to take temperature reading. Individually boxed, range 0°-220° F.

** Unique Made-For-Brewing Dial Face **BrewMometer™ Unique Dial-face The unique patent pending dialface guides the brewer through the brewing process, helping to improve quality and consistency. The hermetically sealed glass face ensures long life. Large 3" dia. dial with low parallax stepped face, fine...

** Unique Made-For-Brewing Dial Face ** BrewMometer™ Unique Dial-face The unique patent pending dialface guides the brewer through the brewing process, helping to improve quality and consistency. The hermetically sealed glass face ensures long life. Large 3" dia. dial with low parallax stepped face,...