Filter
55 results
30
- 10
- 15
- 20
- 25
- 30
- 50
Alphabetically, A-Z
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort
Sort by:
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
-
Vendor: High Gravity FermentationsGreat for transferring flow between two destinations. L port stainless steel ball valve with lock out handle. Each end of the valve has 1/2" female pipe threads, and is suitable for applications where the temperature will be between -20 to 450 degrees F, and...
- $44.95
-
- $44.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsThis stainless steel valve with stainless steel bulkhead fits the 7/8" hole in most coolers when you remove the original plastic spigot. The interior stainless steel bulkhead projects 1½" into the cooler, and features ½" female pipe threads, perfect for a Bazooka Screen. Three...
- $39.95
-
- $39.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsThis stainless steel valve with stainless steel bulkhead fits a 7/8" hole you drill with a metal rated hole-saw or step-drill bit. These weld-less fittings feature nuts that have machined O ring containment grooves for the included high temperature silicone washer, so it will...
- $37.95
-
- $37.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsThis stainless steel valve with stainless steel bulkhead fits a 7/8" hole you drill with a metal rated hole-saw or step-drill bit. These weld-less fittings feature nuts that have machined O ring containment grooves for the included high temperature silicone washer, so it will...
- $41.95
-
- $41.95
- Unit price
- / per
-
Vendor: Blichmann EngineeringThe patent pending G2 Linear Flow valve is now in tri-clamp. Easily fine tune your flow rate for sparging, lautering and chilling, increasing the repeatability of your system. The built in 90 degree outlet can be oriented at any angle to make hose routing...
- $49.00
-
- $49.00
- Unit price
- / per
-
Vendor: Blichmann EngineeringThe patent pending G2 Linear Flow valve is now in tri-clamp. Easily fine tune your flow rate for sparging, lautering and chilling, increasing the repeatability of your system. The built in 90 degree outlet can be oriented at any angle to make hose routing...
- $49.00
-
- $49.00
- Unit price
- / per
-
Vendor: Blichmann EngineeringBoilerMakerâ„¢ G2 linear flow valve to retrofit into G1 kettles. Patent pending G2 linear flow valve allows you to easily fine tune your flow rate for sparging, lautering and chilling, increasing the repeatability of your system. The built in 90 degree outlet can be...
- $69.95
-
- $69.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsFull port stainless steel ball valves with a two-piece body and a lock out handle. Each end of the valve has 1/2" female pipe threads, and is suitable for applications where the temperature will be between -20 to 450 degrees F, and the pressure...
- $19.95
-
- $19.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsThis 304 stainless steel valve has 1" / 1.5" TC flanges on both ends The bore is exactly 1-3/8". The valve can be locked into several positions at various degrees of "open". To unlock the handle to turn the valve, the trigger is squeezed....
- $69.99
-
- $69.99
- Unit price
- / per
-
Vendor: Blichmann EngineeringRecirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool inlet comes with the Blichmann G2 Valve Does...
- $69.00
-
- $69.00
- Unit price
- / per
-
Vendor: Blichmann EngineeringRecirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool inlet comes with the Blichmann 1.5" Sanitary Butterfly...
- $79.99
-
- $79.99
- Unit price
- / per
-
Vendor: BrewHardwareRecirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool port assembly installs high up on your kettle...
- $34.95
-
- $34.95
- Unit price
- / per
-
Vendor: BrewHardwareRecirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool port assembly installs high up on your kettle...
- $39.95
-
- $39.95
- Unit price
- / per
-
Vendor: BrewHardwareBrewers that use immersion chillers and also own a pump should know that recirculating the wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center...
- $25.99
-
- $25.99
- Unit price
- / per
-
Vendor: High Gravity Fermentations1/2" Close Nipple Stainless Steel
- $3.95
-
- $3.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsQuick Disconnect - Elbow 1/2 in. Hose Barb, male QD. Â Patented HFC12 series couplings have flow comparable to many 1/2" nominal flow couplings in a 3/8" body size. Compact and lightweight, HFC couplings replace bulky and heavy brass ball and sleeve couplings in...
- $8.95
-
- $8.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsQuick Disconnect - 1/2 in. Hose Barb, Male QD Â Patented HFC12 series couplings have flow comparable to many 1/2" nominal flow couplings in a 3/8" body size. Compact and lightweight, HFC couplings replace bulky and heavy brass ball and sleeve couplings in a...
- $9.95
-
- $9.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsQuick Disconnect - 1/2 in. NPT, Female QD, Not Valved  Patented HFC12 series couplings have flow comparable to many 1/2" nominal flow couplings in a 3/8" body size. Compact and lightweight, HFC couplings replace bulky and heavy brass ball and sleeve couplings in...
- $15.95
-
- $15.95
- Unit price
- / per
-
Vendor: BrewHardwareType A - Male QD/ Female 1/2" NPT. The most common use for this part is attaching to the wort in/out ports on a plate chiller. It can also be used for recirculation ports, the in/out of a HERMS coil. etc. Brewhardware's stainless steel...
- $5.95
-
- $5.95
- Unit price
- / per
-
Vendor: BrewHardwareType B - Female QD Coupling to Male 1/2" NPT. These are usually installed on the more portable or "mobile" end. The type B can be coupled to a garden hose adapter to backflush plate chillers or to fill vessels with fresh brewing water....
- $7.95
-
- $7.95
- Unit price
- / per
-
Vendor: BrewHardwareBrewhadware's stainless steel Camlock style disconnects (sometimes called cam and groove) are a great compromise between cost and function for connections between vessels, chillers, pumps and hose sets. The "quick disconnect" portion of the camlock system consists of male and female parts. The male...
- $7.95
-
- $7.95
- Unit price
- / per
-
Vendor: BrewHardwareCam Kit BL - This is a Type B camlock and a High Flow Elbow Barb. This is great for the hose ends that connect to vessel bulkheads. When three or four feet of silicone gets filled with liquid, it tends to pull down...
- $12.95
-
- $12.95
- Unit price
- / per
-
Vendor: BrewHardwareType F - Male QD/ Male 1/2" NPT. The most common use for this part is attaching to the output of your vessel ball valves. Brewhardware's stainless steel Camlock style disconnects (sometimes called cam and groove) are a great compromise between cost and function...
- $5.95
-
- $5.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsSS High-Flow Quick Disconnect - Female to 1/2" Barb  Made from 304 stainless steel. When used in conjunction with the male QD these quick disconnects seal up completely regardless of the liquids direction of flow, while remaining simple and easy to use. Feature...
- $17.95
-
- $17.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsSS High-Flow Quick Disconnect - 1/2" Female Pipe Thread  Made from 304 stainless steel. When used in conjunction with the male QD these quick disconnects seal up completely regardless of the liquids direction of flow, while remaining simple and easy to use. These...
- $17.95
-
- $17.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsSS High-Flow Quick Disconnect - 1/2" Male Pipe Thread Female QD Used with the Stainless Steel Male Quick Disconnect these quick disconnects seal up very well in either flow direction, without a lot of work in connecting them. These feature a 1/2" Male National Pipe Thread...
- $17.95
-
- $17.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsStainless Steel Male Quick Disconnect 1/2" Barb Will hold pressure for typical brewing applications when moving liquids at 60psi or less. Â When used with the male QD these qui | ck disconnect seal up very well in either flow direction. Â
- $12.95
-
- $12.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsSS High-Flow Quick Disconnect - 1/2" Female Pipe Thread male QD Used with the Stainless Steel Female Quick Disconnect these quick disconnects seal up very well in either flow direction, without a lot of work in connecting them. These feature a 1/2" Female National Pipe Thread...
- $12.95
-
- $12.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsSS High-Flow Quick Disconnect - 1/2" Male Pipe Thread male QD Used with the Stainless Steel Female Quick Disconnect these quick disconnects seal up very well in either flow direction, without a lot of work in connecting them. These feature a 1/2" Male National Pipe Thread...
- $12.95
-
- $12.95
- Unit price
- / per
-
Vendor: Blichmann EngineeringBlichmann's new QuickConnectorsâ„¢ are a clean sheet design with features not found in any other fitting on the market: 100% stainless throughout High temp silicone grip provides a cool touch even with hot liquids! Ribbed grips allow quick comfortable tool-free operation Silicone o-ring seal...
- $13.99
-
- $13.99
- Unit price
- / per