Brewpot Conversion Parts

This stainless steel valve with stainless steel bulkhead fits the 7/8" hole in most coolers when you remove the original plastic spigot.  The interior stainless steel bulkhead projects 1½" into the cooler, and features ½" female pipe threads, perfect for a Bazooka Screen. Three...

This stainless steel valve with stainless steel bulkhead fits the 7/8" hole in most coolers when you remove the original plastic spigot.  The interior stainless steel bulkhead projects 1½" into the cooler, and features ½" female pipe threads, perfect for a Bazooka Screen.  Includes...

This stainless steel valve with stainless steel bulkhead fits a 7/8" hole you drill with a metal rated hole-saw or step-drill bit. These weld-less fittings feature nuts that have machined O ring containment grooves for the included high temperature silicone washer, so it will...

This stainless steel valve with stainless steel bulkhead fits a 7/8" hole you drill with a metal rated hole-saw or step-drill bit. These weld-less fittings feature nuts that have machined O ring containment grooves for the included high temperature silicone washer, so it will...

This heavy duty multi-purpose all-stainless screen screws into the Kettle Valve to provide you with a heavy duty stainless steel screen for mashing and boiling.  Made from 304 stainless, 16 mesh size to prevent grain husks and whole hops from entering your valve. Great as...

Blichmann industrial grade brewing gloves are standard issue in commercial breweries!  Reduce risk of burns and scalds Keeps harmful sanitizers, acids, and caustic chemicals from your skin Since they can be effectively sanitized, they are a great way to keep sanitized equipment sanitized! Elbow...

This 304 stainless steel valve has 1" / 1.5" TC flanges on both ends The bore is exactly 1-3/8". The valve can be locked into several positions at various degrees of "open". To unlock the handle to turn the valve, the trigger is squeezed....

Twist Lock extension cord. 10 Gauge, 3 conductor SO Cord. 6ft. NEMA L6-30 plug to NEMA L6-30 receptacle

This is a replacement clear silicone gasket for any female camlock coupling. It comes standard inside the Cam B, C, Big C, D, and DC. You don't have to buy them separately unless you need a replacement or spares. Material: Silicone

1.5" Tri-Clamp Silicone Gasket is used between fittings for a high temperature seal. Handles a wide range of temperatures from -58°F to 400°F. Material: Silicone Dimensions: 1.5" Fitting

This stainless steel heating element is recommended for large electric brew kettles (25 - 55 gallons), up to one bbl net batch.   Element is unwired with no cord for those who want to do it themselves. Length: 14 inches To install with our...

For plugging holes that have been drilled for heating elements.

Electric Kettle Element Install Enclosure, Bare Enclosure for Weldless Installs with 1" NPSL Grooved Locknut and silicone o-ring. This version of Brewhardware's Hot Pod enclosure system is used to protect the electrical terminals and provide a ground location for electric heating elements that will...

Cord for heating elements, 3-prong, 10 Gauge, 6ft.

SS nut and silicone o-ring for heating element. A machined stainless steel nut, and high-temperature silcone o-ring kit to facilitate weldless installation of an electric heating element in just about any kettle, or vessel. Note: The weldless heating element kit does not include the...

Replacement silicone o-ring for heating element. Type O-Ring O-Ring Type Standard Cross Section Shape Round Width 3/16" Actual Width .210" Inside Diameter 1-1/4" Actual Inside Diameter 1.225" Outside Diameter 1-5/8" Actual Outside Diameter 1.645" Material Silicone Silicone Type Standard, FDA Compliant Durometer Hard Durometer...

New to the Blichmann Engineering lineup is the patent pending HopBlocker boil kettle filtration system! Over a year of brutal but tasty research yielded a filtration system that has up to 95% efficiency and is virtually impervious to plugging! Blichmann tested the HopBlocker with...

This is the circular pattern spray nozzle that we use to construct the vessel input through the lid of a BIAB system. Includes: SS coupler, close pipe nipple, washer, nut, (all 1/2 inch NPT SS), two silicone o-rings, and sprinkler head. Drill 7/8 inch...

Silicone o-rings.  ID: 13/16 in., OD: 15/16 in.  Perfect for weld-less connections using 1/2 inch pipe and fittings.

This 1.5" TC butterfly valve can be used on Spike+ kettles. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions. The handle is a special 'shorty' style which keeps a compact design. This handle is made...

Spike's conicals come equipped with this 100% sanitary 2.0” TC butterfly valve. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions. The butterfly valve is the preferred valve for the cold side of brewing instead...

Cable assembly with quick disconnects on both ends. Has XLR style plug for use with EBC-SV and EBC III. This is the old style for pre-2014 models.

This silicone braided cable has an extra layer of metal braid between the outside silicone insulation and inside Teflon insulation for better protection and durability. Both ends of this braided cable are female P2CON-XS12 connector, which is compatible with standard liquid tight probe or...

Silicone washer for temperature probes.

1/2" NPT - 4 inches long temperature probe.  Compatible with all of our controllers that come with a probe.

1/2" NPT - 6 inches long temperature probe. Compatible with all of our controllers that come with a probe. Installs in vessel NPT fitting, thermowell, or in a stopper in a fermenter.

1/2" NPT - 8 inches long temperature probe. Compatible with all of our controllers that come with a probe. Installs in vessel thermowell, or in a stopper in a fermenter.

These RTD temperature sensors are for applications that need liquid tight seal. Perfect for beer brewing. They can be easily installed on a standard or instrument (short outlet)  tri-clamp (tri-clover) Tee. Probe length is 2.36" (60mm for Standard Tee), and 8" (200 mm). The diameter of...

1/2" NPT - 1.5 inch long temperature probe.  Compatible with all of our controllers that come with a probe.  Installs in 1/2 inch Tee to monitor temp of circulating liquid, or any 1/2"NPT fitting.

Temperature probe with weldless kit, 2 inches long. Compatible with all of our controllers that come with a probe.  Installs in 9/16 inch hole directly in vessel.