Pumps | Plumbing

This 304 stainless steel valve has 1" / 1.5" TC flanges on both ends The bore is exactly 1-3/8". The valve can be locked into several positions at various degrees of "open". To unlock the handle to turn the valve, the trigger is squeezed....

Full port stainless steel ball valves with a two-piece body and a lock out handle. Each end of the valve has 1/2" female pipe threads, and is suitable for applications where the temperature will be between -20 to 450 degrees F, and the pressure...

Great for transferring flow between two destinations.  L port stainless steel ball valve with lock out handle. Each end of the valve has 1/2" female pipe threads, and is suitable for applications where the temperature will be between -20 to 450 degrees F, and...

The patent pending G2 Linear Flow valve is now in tri-clamp. Easily fine tune your flow rate for sparging, lautering and chilling, increasing the repeatability of your system. The built in 90 degree outlet can be oriented at any angle to make hose routing...

BoilerMaker™ G2 linear flow valve to retrofit into G1 kettles. Patent pending G2 linear flow valve allows you to easily fine tune your flow rate for sparging, lautering and chilling, increasing the repeatability of your system. The built in 90 degree outlet can be...

The patent pending G2 Linear Flow valve is now in tri-clamp. Easily fine tune your flow rate for sparging, lautering and chilling, increasing the repeatability of your system. The built in 90 degree outlet can be oriented at any angle to make hose routing...

Recirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool inlet comes with the Blichmann G2 Valve Does...

Recirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool inlet comes with the Blichmann 1.5" Sanitary Butterfly...

Recirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool port assembly installs high up on your kettle...

Recirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool port assembly installs high up on your kettle...

Brewers that use immersion chillers and also own a pump should know that recirculating the wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center...

Replacement o-rings for the Riptide™ pump.

Replacement impeller for March 809 pump.

Use this magnetic drive to move hot wort in an all-grain system and also to transfer wort from boil kettle to fermenter. The housing of the unit is made from tough, food grade polysulfone. The magnetic drive allows you to slow down the flow...

Upgrade your MKII pump with a 304 stainless steel replacement head. Stainless steel is more durable if you are attaching ball valves. Very occasionally the threads on the plastic head that comes standard on the MKII can break if you are using hard to...

Use this magnetic drive to move hot wort in an all-grain system and also to transfer wort from boil kettle to fermenter. The housing of the unit is made from 304 stainless steel. The magnetic drive allows you to slow down the flow without...

The team of homebrewers at Blichmann Engineering and March Manufacturing have teamed to create the RipTide™ It solves a number of problems. High performance curved blade impeller and strong rare earth magnets deliver 7 GPM and up to 21ft of lift Tri-clamp head connection fully...

The team of homebrewers at Blichmann Engineering and March Manufacturing have teamed to create the RipTide™ It solves a number of problems. High performance curved blade impeller and strong rare earth magnets deliver 7 GPM and up to 21ft of lift Tri-clamp head connection fully...

The RipTide™ Upgrade Kit will fit the following pumps below. Chugger™ March™ CPSS-IN-1 (115V) 809-BR-HS CPSS-IN-2 (230V) 809-PL-HS CPSS-CI-1 (115V) 809-SS-HS CPSS-CI-2 (230V) 809-BR-HS-C CPPS-IN-1 (115V) 809-PL-HS-C TCPSS-IN (115/230V) 809-SS-HS-C TCPSS-CI (115/230V) 809-BR 809-PL 809-SS 809-BR-C 809-PL-C 809-SS-C 815-BR 815-PL 815-SS 815-BR-C 815-PL-C 815-SS-C...

Introducing the Spike Flow. With features like an Air Relief Valve (ARV), 6-vane impeller design, stainless steel precision machined casting and an integrated impeller shaft and thrust bearing, the Flow is fantastic addition to the Spike line.   Higher Pressure & Flow. The Spike...

Spike's 1/2" stainless steel ball valve screws directly into our brew kettles, no need for an additional nipple to make the connection like competitors valves. This valve is dual sided with a male (which screws directly into your kettle) and a female end (which...

This 1.5" TC butterfly valve can be used on Spike+ kettles. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions. The handle is a special 'shorty' style which keeps a compact design. This handle is made...

Spike's conicals come equipped with this 100% sanitary 2.0” TC butterfly valve. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions. The butterfly valve is the preferred valve for the cold side of brewing instead...

This whirlpool assembly includes a Spike 1/2" stainless steel ball valve, Side Pickup Tube, and Camlock F disconnect.  Specs: Spike 304 stainless steel NPT valve 1/2" NPT Side Pickup Tube Camlock F disconnect

This whirlpool assembly includes a Spike TC valve, Side Pickup Tube, and a pair of TC clamps and gaskets Specs: Spike 304 stainless steel TC valve TC Side Pickup Tube 2 1.5" TC Clamps 2 1.5" TC Gaskets

Translucent, food-grade tubing temperature rated to 500F. Odorless, tasteless, and inert Silicone tubing is FDA food-grade approved from -100F to 500F. Translucent natural color allows you to see the flow. The perfect tubing for building a personal brewery, especially for any time that the...

Translucent, food-grade tubing temperature rated to 500F. Odorless, tasteless, and inert Silicone tubing is FDA food-grade approved from -100F to 500F. Translucent natural color allows you to see the flow. The perfect tubing for building a personal brewery, especially for any time that the...

This stainless steel valve with stainless steel bulkhead fits the 7/8" hole in most coolers when you remove the original plastic spigot.  The interior stainless steel bulkhead projects 1½" into the cooler, and features ½" female pipe threads, perfect for a Bazooka Screen. Three...

This stainless steel valve with stainless steel bulkhead fits the 7/8" hole in most coolers when you remove the original plastic spigot.  The interior stainless steel bulkhead projects 1½" into the cooler, and features ½" female pipe threads, perfect for a Bazooka Screen.  Includes...

This stainless steel valve with stainless steel bulkhead fits a 7/8" hole you drill with a metal rated hole-saw or step-drill bit. These weld-less fittings feature nuts that have machined O ring containment grooves for the included high temperature silicone washer, so it will...