57 results
30
- 10
- 15
- 20
- 25
- 30
- 50
Alphabetically, A-Z
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort
Sort by:
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
-
Vendor: Blichmann EngineeringBlichmann's new QuickConnectors™ are a clean sheet design with features not found in any other fitting on the market: 100% stainless throughout High temp silicone grip provides a cool touch even with hot liquids! Ribbed grips allow quick comfortable tool-free operation Silicone o-ring seal...
- $29.95
-
- $29.95
- Unit price
- / per
-
Vendor: Spike BrewingSpike's 1/2" stainless steel ball valve screws directly into our brew kettles, no need for an additional nipple to make the connection like competitors valves. This valve is dual sided with a male (which screws directly into your kettle) and a female end (which...
- $30.00
-
- $30.00
- Unit price
- / per
-
Vendor: Spike BrewingThis 1.5" TC butterfly valve can be used on Spike+ kettles. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions. The handle is a special 'shorty' style which keeps a compact design. This handle is made...
- $60.00
-
- $60.00
- Unit price
- / per
-
Vendor: Spike BrewingSpike's conicals come equipped with this 100% sanitary 2.0” TC butterfly valve. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions. The butterfly valve is the preferred valve for the cold side of brewing instead...
- $70.00
-
- $70.00
- Unit price
- / per
-
More sizes availableVendor: Spike BrewingSpike's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with Spike's full port valves which have a 5/8" flow diameter; no flow restriction. Spike's proprietary fittings uses quick connect technology. The quick connect fitting simply hand...
- From $33.00
-
- From $33.00
- Unit price
- / per
-
Vendor: Spike BrewingSpike's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with Spike's full port valves which have a 5/8" flow diameter; no flow restriction. Spike's proprietary fittings uses quick connect technology. The quick connect fitting simply hand...
- $30.00
-
- $30.00
- Unit price
- / per
-
Vendor: Spike BrewingSpike's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with Spike's full port valves which have a 5/8" flow diameter; no flow restriction. Spike's proprietary fittings uses quick connect technology. The quick connect fitting simply hand...
- $33.00
-
- $33.00
- Unit price
- / per
-
More sizes availableVendor: Spike BrewingThe Spike Tr-clamp center pickup is specially designed to work with their Spike Tri-clamp line of kettles. The dual 1.5" TC flange allows the pickup tube to attach to the kettle and have a valve or other 1.5" TC accessory attached to the outside....
- From $40.00
-
- From $40.00
- Unit price
- / per
-
Vendor: Spike BrewingThe Spike Tr-clamp shorty pickup is specially designed to work with their Spike Tri-clamp line of kettles. The dual 1.5" TC flange allows the pickup tube to attach to the kettle and have a valve or other 1.5" TC accessory attached to the outside....
- $35.00
-
- $35.00
- Unit price
- / per
-
Vendor: Spike BrewingSpike's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with Spike's full port valves which have a 5/8" flow diameter; no flow restriction. Spike's proprietary fittings uses quick connect technology. The quick connect fitting simply hand...
- $40.00
-
- $40.00
- Unit price
- / per
-
Vendor: Spike BrewingAttach this racking arm to the racking port on your bottom drain Tank Boil Kettle or Solo to ensure only the highest quality wort makes it into the fermenter. Specifically designed for the Spike Brewing Tank Bottom Drain Boil and Solo kettles, this...
- $45.00
-
- $45.00
- Unit price
- / per
-
Vendor: Spike BrewingThis whirlpool assembly includes a Spike 1/2" stainless steel ball valve, Side Pickup Tube, and Camlock F disconnect. Specs: Spike 304 stainless steel NPT valve 1/2" NPT Side Pickup Tube Camlock F disconnect
- $68.95
-
- $68.95
- Unit price
- / per
-
Vendor: Spike BrewingThis whirlpool assembly includes a Spike TC valve, Side Pickup Tube, and a pair of TC clamps and gaskets Specs: Spike 304 stainless steel TC valve TC Side Pickup Tube 2 1.5" TC Clamps 2 1.5" TC Gaskets
- $110.00
-
- $110.00
- Unit price
- / per
-
Vendor: High Gravity Fermentations304 Stainless, 1/2" Female Pipe Thread on all three openings.
- $7.95
-
- $7.95
- Unit price
- / per
-
-
Vendor: BrewHardware1.5" Tri-Clamp (TC) flange to 1/2 " FNPT. Adapts 1/2" NPT Male fittings to 1.5" Tri-Clamp.
- $18.99
-
- $18.99
- Unit price
- / per
-
Vendor: BrewHardware1-1/2" Triclover (TC) flange to 1/4" OD hose barb. This is best for use with 3/16" or 1/4" ID tubing such as our Bevlex tubing.
- $15.95
-
- $15.95
- Unit price
- / per
-
Vendor: BrewHardware1-1/2" Tri-Clamp (TC) flange to 1/4" MFL (Male Flare Adapter). Good for connecting a swivel barb adapter or gas connection to a chilling manifold.
- $11.99
-
- $11.99
- Unit price
- / per
-
Vendor: BrewHardware1-1/2" Tri-Clamp (TC) flange to 5/8" OD hose barb. This is best for use with 1/2" ID silicone tubing to ensure maximum flow.
- $16.95
-
- $16.95
- Unit price
- / per
-
Vendor: BrewHardwareThis allows you to snap on a ball-lock liquid disconnect on to a 1.5" TC port. The ball lock post is removable from the TC side and it is equipped with a poppit valve like all corny posts.
- $24.99
-
- $24.99
- Unit price
- / per
-
Vendor: BrewHardware2" Tri-Clamp (TC) flange to 1/2 " FNPT. Adapts 1/2" NPT Male fittings to 2" Tri-Clamp.
- $19.99
-
- $19.99
- Unit price
- / per
-
Vendor: BrewHardwareAdapt any 2" tri-clamp port or valve to work with an existing 1.5" tri-clamp fitting. The eccentric design is ideal for reducing 2" to 1.5" pipe in horizontal runs. Perfect for attaching a 1.5" hose to the bottom of fermenters with 2" bottom ports. 1.5"...
- $29.99
-
- $29.99
- Unit price
- / per
-
Vendor: Spike BrewingAnother Spike innovation that solves two issues. The obvious benefit from insulated lines is increasing your cooling efficiency from your glycol lines. The other benefit is the elimination of line 'sweating'. No more pools of water on your floor during those hot Summer days!...
- $30.00
-
- $30.00
- Unit price
- / per
-
Vendor: High Gravity FermentationsThis stainless steel valve with stainless steel bulkhead fits the 7/8" hole in most coolers when you remove the original plastic spigot. The interior stainless steel bulkhead projects 1½" into the cooler, and features ½" female pipe threads, perfect for a Bazooka Screen. Three...
- $39.95
-
- $39.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsThis stainless steel valve with stainless steel bulkhead fits a 7/8" hole you drill with a metal rated hole-saw or step-drill bit. These weld-less fittings feature nuts that have machined O ring containment grooves for the included high temperature silicone washer, so it will...
- $37.95
-
- $37.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsThis stainless steel valve with stainless steel bulkhead fits a 7/8" hole you drill with a metal rated hole-saw or step-drill bit. These weld-less fittings feature nuts that have machined O ring containment grooves for the included high temperature silicone washer, so it will...
- $41.95
-
- $41.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsA solid stainless steel bulkhead with a flat, thick rubber washer that makes it super easy to install on most kettles.
- $15.95
-
- $15.95
- Unit price
- / per