Filter
42 results
30
- 10
- 15
- 20
- 25
- 30
- 50
Alphabetically, A-Z
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort
Sort by:
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
-
Vendor: Blichmann EngineeringRecirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool inlet comes with the Blichmann G2 Valve Does...
- $69.00
-
- $69.00
- Unit price
- / per
-
Vendor: Blichmann EngineeringRecirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool inlet comes with the Blichmann 1.5" Sanitary Butterfly...
- $79.99
-
- $79.99
- Unit price
- / per
-
More sizes availableVendor: BrewHardwareRecirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool port assembly installs high up on your kettle...
- From $34.95
-
- From $34.95
- Unit price
- / per
-
Vendor: BrewHardwareRecirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool port assembly installs high up on your kettle...
- $39.95
-
- $39.95
- Unit price
- / per
-
Vendor: BrewHardwareBrewers that use immersion chillers and also own a pump should know that recirculating the wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center...
- $25.99
-
- $25.99
- Unit price
- / per
-
Vendor: High Gravity Fermentations1/2" Close Nipple Stainless Steel
- $3.95
-
- $3.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsQuick Disconnect - Elbow 1/2 in. Hose Barb, male QD. Patented HFC12 series couplings have flow comparable to many 1/2" nominal flow couplings in a 3/8" body size. Compact and lightweight, HFC couplings replace bulky and heavy brass ball and sleeve couplings in...
- $8.95
-
- $8.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsQuick Disconnect - 1/2 in. Hose Barb, Male QD Patented HFC12 series couplings have flow comparable to many 1/2" nominal flow couplings in a 3/8" body size. Compact and lightweight, HFC couplings replace bulky and heavy brass ball and sleeve couplings in a...
- $9.95
-
- $9.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsQuick Disconnect - 1/2 in. NPT, Female QD, Not Valved Patented HFC12 series couplings have flow comparable to many 1/2" nominal flow couplings in a 3/8" body size. Compact and lightweight, HFC couplings replace bulky and heavy brass ball and sleeve couplings in...
- $15.95
-
- $15.95
- Unit price
- / per
-
Vendor: BrewHardwareType A - Male QD/ Female 1/2" NPT. The most common use for this part is attaching to the wort in/out ports on a plate chiller. It can also be used for recirculation ports, the in/out of a HERMS coil. etc. Brewhardware's stainless steel...
- $5.95
-
- $5.95
- Unit price
- / per
-
Vendor: BrewHardwareType B - Female QD Coupling to Male 1/2" NPT. These are usually installed on the more portable or "mobile" end. The type B can be coupled to a garden hose adapter to backflush plate chillers or to fill vessels with fresh brewing water....
- $7.95
-
- $7.95
- Unit price
- / per
-
Vendor: BrewHardwareBrewhadware's stainless steel Camlock style disconnects (sometimes called cam and groove) are a great compromise between cost and function for connections between vessels, chillers, pumps and hose sets. The "quick disconnect" portion of the camlock system consists of male and female parts. The male...
- $7.95
-
- $7.95
- Unit price
- / per
-
Vendor: BrewHardwareCam Kit BL - This is a Type B camlock and a High Flow Elbow Barb. This is great for the hose ends that connect to vessel bulkheads. When three or four feet of silicone gets filled with liquid, it tends to pull down...
- $12.95
-
- $12.95
- Unit price
- / per
-
Vendor: BrewHardwareType F - Male QD/ Male 1/2" NPT. The most common use for this part is attaching to the output of your vessel ball valves. Brewhardware's stainless steel Camlock style disconnects (sometimes called cam and groove) are a great compromise between cost and function...
- $5.95
-
- $5.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsSS High-Flow Quick Disconnect - Female to 1/2" Barb Made from 304 stainless steel. When used in conjunction with the male QD these quick disconnects seal up completely regardless of the liquids direction of flow, while remaining simple and easy to use. Feature...
- $17.95
-
- $17.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsSS High-Flow Quick Disconnect - 1/2" Female Pipe Thread Made from 304 stainless steel. When used in conjunction with the male QD these quick disconnects seal up completely regardless of the liquids direction of flow, while remaining simple and easy to use. These...
- $17.95
-
- $17.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsSS High-Flow Quick Disconnect - 1/2" Male Pipe Thread Female QD Used with the Stainless Steel Male Quick Disconnect these quick disconnects seal up very well in either flow direction, without a lot of work in connecting them. These feature a 1/2" Male National Pipe Thread...
- $17.95
-
- $17.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsStainless Steel Male Quick Disconnect 1/2" Barb Will hold pressure for typical brewing applications when moving liquids at 60psi or less. When used with the male QD these qui | ck disconnect seal up very well in either flow direction.
- $12.95
-
- $12.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsSS High-Flow Quick Disconnect - 1/2" Female Pipe Thread male QD Used with the Stainless Steel Female Quick Disconnect these quick disconnects seal up very well in either flow direction, without a lot of work in connecting them. These feature a 1/2" Female National Pipe Thread...
- $12.95
-
- $12.95
- Unit price
- / per
-
Vendor: High Gravity FermentationsSS High-Flow Quick Disconnect - 1/2" Male Pipe Thread male QD Used with the Stainless Steel Female Quick Disconnect these quick disconnects seal up very well in either flow direction, without a lot of work in connecting them. These feature a 1/2" Male National Pipe Thread...
- $12.95
-
- $12.95
- Unit price
- / per
-
Vendor: Blichmann EngineeringBlichmann's new QuickConnectors™ are a clean sheet design with features not found in any other fitting on the market: 100% stainless throughout High temp silicone grip provides a cool touch even with hot liquids! Ribbed grips allow quick comfortable tool-free operation Silicone o-ring seal...
- $13.99
-
- $13.99
- Unit price
- / per
-
Vendor: Blichmann EngineeringBlichmann's new QuickConnectors™ are a clean sheet design with features not found in any other fitting on the market: 100% stainless throughout High temp silicone grip provides a cool touch even with hot liquids! Ribbed grips allow quick comfortable tool-free operation Silicone o-ring seal...
- $17.99
-
- $17.99
- Unit price
- / per
-
Vendor: Blichmann EngineeringBlichmann's new QuickConnectors™ are a clean sheet design with features not found in any other fitting on the market: 100% stainless throughout High temp silicone grip provides a cool touch even with hot liquids! Ribbed grips allow quick comfortable tool-free operation Silicone o-ring seal...
- $13.99
-
- $13.99
- Unit price
- / per
-
Vendor: Blichmann EngineeringBlichmann's QuickConnectors™ are a clean sheet design with features not found in any other fitting on the market: 100% stainless throughout High temp silicone grip provides a cool touch even with hot liquids! Ribbed grips allow quick comfortable tool-free operation Silicone o-ring seal is...
- $13.99
-
- $13.99
- Unit price
- / per
-
Vendor: Blichmann EngineeringBlichmann's new QuickConnectors™ are a clean sheet design with features not found in any other fitting on the market: 100% stainless throughout High temp silicone grip provides a cool touch even with hot liquids! Ribbed grips allow quick comfortable tool-free operation Silicone o-ring seal...
- $17.99
-
- $17.99
- Unit price
- / per
-
Vendor: Blichmann EngineeringBlichmann's new QuickConnectors™ are a clean sheet design with features not found in any other fitting on the market: 100% stainless throughout High temp silicone grip provides a cool touch even with hot liquids! Ribbed grips allow quick comfortable tool-free operation Silicone o-ring seal...
- $29.95
-
- $29.95
- Unit price
- / per
-
More sizes availableVendor: Spike BrewingSpike's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with Spike's full port valves which have a 5/8" flow diameter; no flow restriction. Spike's proprietary fittings uses quick connect technology. The quick connect fitting simply hand...
- From $33.00
-
- From $33.00
- Unit price
- / per
-
Vendor: Spike BrewingSpike's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with Spike's full port valves which have a 5/8" flow diameter; no flow restriction. Spike's proprietary fittings uses quick connect technology. The quick connect fitting simply hand...
- $30.00
-
- $30.00
- Unit price
- / per
-
Vendor: Spike BrewingSpike's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with Spike's full port valves which have a 5/8" flow diameter; no flow restriction. Spike's proprietary fittings uses quick connect technology. The quick connect fitting simply hand...
- $33.00
-
- $33.00
- Unit price
- / per
-
More sizes availableVendor: Spike BrewingThe Spike Tr-clamp center pickup is specially designed to work with their Spike Tri-clamp line of kettles. The dual 1.5" TC flange allows the pickup tube to attach to the kettle and have a valve or other 1.5" TC accessory attached to the outside....
- From $40.00
-
- From $40.00
- Unit price
- / per