Fermenters | Brites | Unitanks

Spike has completely re-designed their stainless conical line from the ground up. These conical fermenters are some of the best on the market. Along with their new TC100 Temp Control System, you'll have everything you need for a most excellent Brew Day.   CF5 Features:...

Spike has completely re-designed their stainless conical line from the ground up. These conical fermenters are some of the best on the market. Along with their new TC100 Temp Control System, you'll have everything you need for a most excellent Brew Day.   CF15...

Spike has completely re-designed their stainless conical line from the ground up. These conical fermenters are some of the best on the market. Along with their new TC100 Temp Control System, you'll have everything you need for a most excellent Brew Day.   CF30...

All pumps are not equal. Spike engineers tested over 15 pumps and found almost all small submersible pumps on the market are grossly overrated. This can greatly affect your temperature control as flow rate is directly proportional to cooling efficiency. To use: Simply plug our pump into our...

Spike knows some customers like to grow into their equipment. That is why they designed the FLEX to be upgraded. When you're ready to step into carbonating your beer in your FLEX, you can easily upgrade to the FLEX+ lid package. The main features are...

Some will have to heat their FLEX during the long winter months and Spike has the solution. The FLEX heater was carefully engineered to match the heating needs to maintain set temperatures even in the coldest winter garage. Spike uses a built in thermostat...

Spike's insulated FLEX jacket uses high quality, extra thick, yet flexible neoprene material to insulate your FLEX from the worst ambient conditions like a hot garage or cold basement. Each custom designed, hand stitched (in the USA) jacket is custom tailored to fit our...

Spike's TC-100 temp control system will manage both cooling and heating of your FLEX. The digital controller's temp probe inserts into the included thermowell that attaches to the secondary port of the FLEX. Also included is a specially fitted neoprene jacket which features reinforced port holes...

The standard Flex is a huge step up from a standard carboy. Made from 304 stainless steel so scratches and shattering glass will be a thing of the past. Not only does the Flex have a dedicated racking port and thermometer port but those...

We are excited to be a part of the Spike Retail Family and are thrilled to introduce the new Flex fermenters. The standard Flex is a huge step up from a standard carboy. Made from 304 stainless steel so scratches and shattering glass will...

Spike's specially designed CO2 gas manifold is designed to attach directly to the 1.5" TC port on your fermenter's lid. This manifold allows you to easily add pressure for transfers, stuck yeast dumps, purging oxygen, carbonating, etc. The manifold has 3 ports for a pressure...

Since most brewers who keg use ball lock connections for hooking up their CO2 tank Spike designed a ball lock fitting to easily add CO2 to your conical. Spike's gas post assembly has a standard ball lock gas post on one end with a 1/4"...

Our 1.5” TC gaskets use an ultra clear FDA Silicone. These will work with both our conicals and kettle applications. These gaskets are rated to withstand temperatures up to 450F and can be used with a direct fire burner application. Specs:  -1.5" TC -FDA...

Spike's 2” TC gaskets use an ultra clear FDA Silicone. These will work with both their conicals and kettle applications. These gaskets are rated to withstand temperatures up to 450F and can be used with a direct fire burner application.Specs: -2" TC -FDA Silicone...

Spike's 4” TC gaskets use an ultra clear FDA Silicone. These will work with both their conicals and kettle applications. These gaskets are rated to withstand temperatures up to 450F and can be used with a direct fire burner application.Specs: -4" TC -FDA Silicone...

These couplers are quick and easy to use. Set of two.

**Not for use with the CF30** The shorty leg extensions are 9” long (compared to 18”). They were specifically designed to be used with the 2” sight glass in the vertical arrangement. This was the major design criteria that Engineering noticed. The long leg...

This pressure gauge can be used while pressure fermenting, briting or pressure transferring.  Specs: -0-30psi -2" Dial -1/4" npt  Examples of how to assemble a pressure gauge and PRV to the top 1.5" TC lid port shown to the right. You can also attach to...

When pressurizing your Spike Conical you'll always want to use a pressure relief valve (PRV). This will prevent the tank from being over pressurized and causing a potential failure to occur. Spike's PRV was developed with their OEM specifically to work with their new...

**A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares** Another cool product our engineers and in-house welders developed is our USA made racking arm. This racking arm provides 6" of total travel allowing you to draw clear...

Attach this racking arm to the racking port on your bottom drain Tank Boil Kettle or Solo to ensure only the highest quality wort makes it into the fermenter.   Specifically designed for the Spike Brewing Tank Bottom Drain Boil and Solo kettles, this...

Cap any 1.5” port with this stainless steel cap. Specs: -1.5" TC -304SS

Cap any 2” port with this stainless steel cap. Specs: -2" TC -304SS

Cap any 4” port with this stainless steel cap. Specs: -4" TC -304SS

A very cool add-on for Spike's conical line. Spike heard many brewers who have switched from clear carboys to stainless and they only have one complaint; They couldn't see their beer fermenting any more. Spike's engineers designed a clear polycarbonate (same material as bullet...

Spike's 2" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized barb (5/8" OD) is specially designed for 1/2" Silicone tubing. The larger size does two things: 1) It stretches the tubing over the barb creating a...

Spike's TC100 temp control system will manage both cooling and heating of your Spike Conical. The digital controller's temp probe will feed into the included thermowell on their CF Series Conical. Also included is a specially fitted neoprene jacket which features reinforced port holes to reduce the chance...

These USA made temp control coils are specifically designed for the Spike CF series conicals and extend far enough into the conical to temp control both full and half batches. Used in conjunction with a temp controller this temp control coil will help manage...

These 90° quick connect fittings will make attaching insulated tubing to your temp coil a breeze.  Specs: -Connect your temp coil to your insulated tubing without tools -3/8" to 1/2" connections -90° design; prevents glycol lines from kinking -2 fittings included per purchase Detailed TC-100 product guide: Product Guide.pdf

Standard clamp for all 1.5" TC (tri-clamp) ports Specs: -1.5" TC -304SS